Rotor	Bucket	Tube Rack	Capacity (ml x places)	Adapter	Tube Material	Maximum Speed(rpm)	Relative Centrifugal Force(g)	Rotor Compatibility
								LC-200	LC-220	LC-230
TS-4LB	S4096-02	-	Microplate x 4	-	-	1,800	510	o	o	o
TS-7LB	7012-10	A7000-10P	12 x 40	-	G	3,100	1,690	o	o	o
	7115-08	-	15 x 32	-	G	3,500	2,380	x	o	o
					PP(C,F)
					PS(C,F) *1
	7015-08	-	15 x 32	-	G	3,500	2,190	o	o	o
			15 x 16	-	PP(C,F)
					PS(C,F) *2
	7050-02	-	50 x 8	-	G	3,500	2,150
				IW9330-050	PP(C,F)
					PS(C) *3
			15 x 8	A1500-04	G
	7015-06	-	15 x 24	-	G	3,600	2,320
			15 x 16	-	PP(C,F)
					PS(C,F) *2
	7150-01	-	50 x 4	-	G	5,000	4,670
				IW9330-050	PP(C,F)
					PS(C)*2
			15 x 4	A1500-04	G
	7050-01	-	50 x 4	-	G	4,000	2,810
				IW9330-050	PP(C,F)
					PS(C)*3
			15 x 4	A1500-04	G
	BH50-01 *7	-	50 x 4	-	PC	4,000	2,950
					PPCO
	BH10-04 *7	-	10 x 16	-	PC	3,500	2,140
					PPCO
	SC-2	-	8 x 4	-	VC	1,600	420
TS-38LB	B438	3850-04P	50 x 16	-	PP(C,F)	3,500	2,380	x	x	o
					PS(C) *1
		3850-N04P	50 x 16	-	PC	3,500	2,380
					PPCO
		3850-02P	50 x 8	-	G	3,500	2,380
		3815-10P	15 x 40	-	PP(C,F)	3,500	2,380
					PS(C,F)*1
		3815-16P	15 x 64	-	G	3,500	2,370
		3806-EK20P	Eiken Tube No.1 6 x 80	-	PS	3,500	2,330
		3810-N20P	10 x 80	-	PC	3,500	2,270
					PPCO
		3804-SI28P	Shionogi Tube 4 x 112	-	PS	3,500	2,180
		3802-EP24P	2.0 x 96	-	PP	3,500	1,780
			1.5 x 96		PP
	B438-96	-	Microplate x 4	-	-	4,200	3,100
	B438-29	-	290 x 4	-	PC	4,200	3,650
			250 x 4		PC
					PPCO
					PE
					FEP
				N-3124-0010	PC
			225 x 4	F2090	PP(F)
			175 x 4
	B438-5002BH *6,7	-	50 x 8	-	PP(C,F)	4,000	3,310
					PS(C) *4
			15 x 8	-	PP(C,F)
					PS(C,F) *4
	B438-1507BH *7	-	15 x 28	-	PP(C,F)	4,000	3,310
					PS(C,F)
TS-39LB	S-439	3950-05P	50 x 20	-	G	3,100	2,070	x	x	o
		3915-20P	15 x 80	-	G	3,100	2,070
		3950-CF05P	50 x 20	-	PP(C,F)	3,100	2,110
					PS(C)*5
		3925-01P	250 x 4	-	G	1,500	480
		3910-02P	100 x 8	-	G	3,100	2,030
		3915-CF12P	15 x 48	-	PP(C,F)	3,100	2,060
					PS(C,F)*4
		3925-FN01P	250 x 4	-	PC	3,100	2,050
					PPCO
					PE
					FEP
				N-3124-0010	PC
			225 x 4	F2090	PP(F)
			175 x 4
		3914-30P	Eiken Tube No.1 6 x 120	-	PS	3,100	2,050
		3912-35P	Shionogi Tube 4 x 140	-	PS	3,100	2,050
	S3996-01	-	Microplate x 4	-	-	1,500	410
TS-40LB	B240-96D	-	Deepwell Plate x 2	AS40-96D	-	4,500	3,010	x	o	o
TLA-11	-	-	50 x 6	-	PP(C,F)	8,900	9,390	o	o	o
					PS(C)	3,900	1,800
			35 x 6	-	PPCO,PC	9,000	9,600
			15 x 6	-	PP(C)	8,400	8,360
					PP(F)	5,400	3,460
					PS(C,F)	3,900	1,800

* For Swing-out rotors only must be balanced by eye. Fixed angle rotor must be balanced properly.
* All rotors, buckets, tube racks and adapters are sold separately.

Definition of abbreviated terms:
Tube Materials: G=Glass, PC=Polycarbonate, PS=Polystylene,VC=Vinyl Chloride, PE=Polyethylene, FEP=Teflon Resin, PPCO=Polypropylenecopolymer, PP=Polypropylene,C=Corning(Registered Trademark of Corning in the U.S.A.), F=Falcon(Registered Trademark of Becton Dickinson in the U.S.A.)
*1,2,3,4,5 Corning and Falcon PS Tubes are limited to the maximum speeds recommended by the respective manufacturer. (*1 3,000rpm, *2 3,100rpm, *3 3,200rpm, *4 2,900rpm, *5 2,800rpm)
*6 Impossible to spin 50ml tubes and 15ml tubes at the same time.
*7 Sealing Bucket